The only UK engine re-manufacturer specialising exclusively in Land Rover
Order by phone tel UK+44 (0)1342 834713
Your cart 0 £0.00
The only UK engine re-manufacturer specialising exclusively in Land Rover Series 2a/111, Range Rover, Defender and Discovery engines, short engines, cylinder heads and associated components. The Company has been re-manufacturing Land Rover engines since the late 70's, is the established market leader and the most experienced Company in this field. We offer a wide range of genuine Land Rover engine parts, which ideally meet customers' needs. Turner products are regarded by many as the benchmark from which all others are judged. Our build quality is second to none.
Since the Late 70’s

only UK engine re-manufacturer
specialising exclusively in Land Rover

heavy investment program over the years to provide
the best equipped facility of it's type in the world.
QUALITY CONTROL Original equipment parts and approved components only used/supplied. The company works according to BS EN ISO 9001 2008 guidelines
Guest Book
Sign
Evan Duggan - New Zealand - Tappet assemblies 12 Sep 2017
Details
    Hello Frida

I'm unable to complete your customer satisfaction survey, needless to say I am very pleased with the timely arrival, yesterday, of the tappet assemblies.

I shall not hesitate in contacting you again should I need any more components.

Cheers Evan
Bjarte Tidemann Andersen - Norway - 2.25 Petrol Engine 28 Jul 2017
Details
    Dear Frida Turner

I would just like to express my gratitude for the new engine sent for my Land Rover, technical advice and especially for the turbo shipment of the new clutch. Thank you so much.

I have now done some test driving, and everything seems so far very nice. There are some puffs, but I think that is due to an old carburettor. Tomorrow I will take the car to MOT testing, and hope it will pass.

I have now summer vacation and plan to take the Land Rover for a trip. When we return I will contact you regarding details aout my old engine for return. Thank you again for excellent service.

Yours
Bjarte Tidemann Andersen
Danny Crouch - Leics - 300TDI Stripped Engine HP head 25 Jul 2017
Details
    Hi Frida & Richard

Please find enclosed the return sheet for the 300TDI engine you supplied. Took a while fo find time to fit the engine in house around other jobs.

I must say again, upon driving the vehicle once the engine was fitted it seemed to perform superbly. Pulled very nice and was a smooth runner. Very happy with the service provided by yourself and everyone involved at Turner Engineering, as always. Thanks again.

Danny @ Crouch Recovery
Jasper Druyts, AWD 4x4, Belgium - TD5 parts 2 Jun 2017
Details
   

Frida ,

 

Wilde gewoon even zeggen dat pakketje is aangekomen , alles is perfect in orde. TOP service !! 

Geweldig hoe jullie met klanten omgaan ! 

Ik raad iedereen aan om bij jullie te bestellen !

 

Groenten 

Jasper 

Een zeer tevreden klant !! 

Ian Lakey, Northumberland - 300TDI parts 29 May 2017
Details
    Hi Frida & Richard
I got my 300TDI finished and installed yesterday and finally got to turn the key! It sounds much quieter and so much smoother than it ever did! Pulling much better too :)  

Just thought I'd drop you a line to say thank you for the excellent service, help and advice you have given me throughout the engine build. It really has been  very much appreciated. Thank you

Kind regards
Ian Lakey

Robin Loveland, Kenya - 18th February 2017 18 Feb 2017
Details
   

300TDI engine HP head, new Turbo etc

Hi all
Just to let you know your refurb Tdi300 is now beating like a good Un in my Kenyan landie!, Doris, Here up in Aberdares at 8000 feet, oodles of power and smooth as silk great product and great result Thank you!!

Robin Loveland

Kevan Lambe, Derbyshire - 25th January 2017 25 Jan 2017
Details
   

LFHP petrol cylinder head

After replacing the head I had some issues with timing, which were rectified by fitting a new distributer. I can now fully appreciate the increase in torque and smooth power curve. Most noticeable is the ease at which Ben (my Series 3 swb rag top) climbs hills.

Thank you for your great product and wonderful service.

Regards
Malcolm Stone - Berkshire - 6th June 2015 6 Jun 2015
Details
   

2.25 5MB Petrol stripped engine LFHP

Frida, hello

Just to say that thecourier company have picked the engine up. I would also like to say that theyare an extremely good and friendly company to work with from a customer'sperspective. This is something I must also say with regard to yourselves. Yourprofessionalism and great organisational skills are much appreciated.
Kind regards
Pierre Magne, France - 15th January 2015 15 Jan 2015
Details
   

Ford 2.4TDci NEW stripped engine& Turbo

Dear Frida

Thanks once more for helping me give a new life to my Defender
Many friends from our internet forum have already commented and I am pleased to send you the thread to this community of 4x4 camper owners

casa-trotter.com

Regards
Pierre Magne

James Hunter, Cheshire - 16th May 2014 16 May 2014
Details
   

200TDI stripped engine with gas flowed head

The 200TDI stripped engine you supplied runs fantastic, it feels like its a new car from the dying slug that it was before with the gas flowed head. It makes the rpm pick up a lot quicker with no noticeable turbo lag which it had a lot before. It runs so much quieter and smoother then the last engine and when the vehicle is in top gear the engine feels like it's got a lot more energy as well.

Thanks for the engine and the help and the instructions you provided.

Thanks again James Hunter

Jaap Guerand, Holland - 17th February 2014 17 Feb 2014
Details
   

Llead free performance 2.25 head

Dear Frida,

We had a dry week-end at last to have a drive with the LandRover equipped with the new cylinder head.
The performance of the engine is so much better! I recommend every LandRover owner to have his/hers engine remanufactured by Your company.
We are very satisfied.

Best regards,
Christine & Jaap Guerand

James Davis, Australia- 14th January 2014 14 Jan 2014
Details
   

2.5 Diesel cylinder head & engine parts

I have included a picture of the old girl atop Big Red, Simpson Desert. About 8000km into the 12,000km trip. Without your advice, help and parts, she wouldn't have made it there!

Mount Garage, Surrey- 30th September 2013 30 Sep 2013
Details
   

3.9V8 ductile iron flanged linered block casting

Hi All,

Russell has asked me to send you a few pictures One of his engine bay and the other of the two cars at Spa last weekend with his brother who raced it.

No. 92 is the engine we have just regenerated with the top hat liners and that was the car that won outright out of 77 cars in the 61 minute race beating Aston DB4, GT40’s, Camero’s, and similar.

Russ No. 93 came thirteenth but he had a bad pit stop as someone had moved the fire extinguisher and he couldn’t put any fuel in without it so his stop was 6 minutes. No. 92 car had a 70 litre tank already so only had to do a 1 minute stop.

Thank you, the old, repaired and ‘daddy’ engine is still fantastic.

Pam McCarthy
Mount Garage

D Murolo, Italy - 12th September 2013 12 Sep 2013
Details
   

200TDI Diesel stripped engine

Dear Mrs Frida,
I have traveled in July 2012 to date with my discovery equipped with your engine 200 tdi 15,000 km, of which 5,000 towing the caravan, with no problems.
I wanted to congratulate you for the excellent service provided.
I am attaching a picture of discovery that drives the caravan
Best regards
Domenico

Egilwe Segosebe, Botswana - 2nd September 2013 2 Sep 2013
Details
   

300TDI Diesel stripped engine with gasflowed head + parts

Dear Frida
Just to let you know how thrilled I am with the performance of my stripped 300 TDI Engine. I Have just done 900 km urban drive and 300 stretch outside urban but that is enough to fill me with joy. It has not yet experienced high throttle and I am excited about the prospects should it come to that because it easily unleashes power. Thank you so much for your professional service and support.

Eagilwe Segosebe

Wouter Zandsta, Holland - 5th August 2013 5 Aug 2013
Details
   

5 Diesel New stripped engine

Hello Frida

So far I'm very pleased with the new engine that finally restored the joy of driving my car. Although I haven't had much kilometres with it yet (approx 1000) I really notice the difference with the previous engine.

Thanks for the good support and delivery of the great new heart that my car received!

Kind Regards
Wouter Zandstra

Mark Allen, Kent - 2nd August 2013 2 Aug 2013
Details
   

4.0V8 ductile iron flanged linered block casting & parts

Hi Frida

Just a note to say thanky ou for my thor 4.0l v8 top linered block and kent cam car all back togethernow pulls really well with no water woes to concern me your a truly fantastic helpful company thank you.
David Orr, N Ireland - 2nd July 2013 2 Jul 2013
Details
   

TD5 short engine assembly

Hi,

I have now got my Defender back and it is GOOD. Smoother and quieter and I'm very happy with the result so far. Thanks for your excellent service.

Thanks again,
David Orr

Steve Wells, Herts -12th June 2013 12 Jun 2013
Details
   

4.6V8 ductile iron flanged linered block casting & cylinder head work

Hi Richard and Frida,

Just to let you know all went well at the weekend in our Rover V8 powered Ford Pop dragster.

Thanks for another great block supplied at such short notice, amazing service!

The conditions were unfortunately not right for record breaking with a strong headwind and slippery track, but on our last run we ran 8.60 seconds to 153 mph which is only 0.06 from our no nitrous record! and the fastest we have run with a headwind. So it looks as though the work you did on my heads has paid off.

We are out again in 2 weeks so I will keep you informed.
Thanks again for your excellent service.
Regards
Steve Wells

Leon Theuns, Perth, Australia - 7th May 2013 7 May 2013
Details
   

4.6V8 stripped engine - ductile iron flanged liners

Hello Frida, how are you!

Received engine and parts within 6 days of ordering, everything was in excellentcondition, beautiful product!

Thanks a lot Frida,
Leon Theuns.

Michael Castle - 4th December 2012 4 Dec 2012
Details
   

Diesel stripped engine

Dear Frida

Thank you for the swift turn around of the reconditioned engine ordered a couple of weeks ago.

I've had the engine running now and it's excellent and very well built so thank you and the team. What a difference a newly built Turner engine makes to the pleasure of driving my Land Rover.

Kind Regards
Michael Castle

Richard Thomas - 15th November 2012 15 Nov 2012
Details
   

4.0V8 Petrol engine, gasflowed heads, H180 Sports Torque camshaft, ductile iron flanged liners

Der Frida
Just a brief note to thank you for all of your help and producing an engine that does the job intended - unlike the original.

Thank you again
Richard Thomas

Chris Blades, Melbourne, Australia - 9th November 2012 9 Nov 2012
Details
   

300TDI cylinder head

Hi
I just purchased a 300Tdi complete head from you guys , I must say what a professional buisness you runthe service is none better and the postage time is out off this world . If you had a company in Australia you would be run off your feet.

Wow 2 days to Melbourne from the uk the only let down was AustraliaPost it took 2 daysfrom Melbourne Airport to travel 130 kays to my place .

Thankyou very much for you professional service and another quality Turners product .

Cheers
Chris Blades

Barry Marcer - Hants - 5th November 2012 5 Nov 2012
Details
   

4.6V8 Petrol engine, gasflowed heads, ductile iron flanged liners

Hi
Just a quick note to let you know that I am very happy with the service you have provided. The new engine is great and the inistallation went very well.

Many thanks
Barry Marcer

Jack Acres - New Zealand - 30th October 2012 30 Oct 2012
Details
   

200TDI Cylinder head - Performance

Hi, just a note to let you know that I have finally got around to fitting the new gas flowed cylinder head that I got off you a couple of months back. Its just as well I did the job as the gasket was starting to show signs of failure. I can notice some immediate improvement in pull away power and am looking forward to my next towing experience.

I can't thank you enough for the care,quality, and product that you and your team provide.

Thanks again,
Jack Acres.
New Zealand

Ken Hall - 25th October 2012 25 Oct 2012
Details
   

6V8 Gasflowed Performance Heads

Just to let you know the heads for my V8, that you have supplied me with are exceptional in quality.

I estimate a 22% increase in not only power but fuel economy also. I finished the re-build last Tuesday am and set off for a 1300 mile round trip and the vehicle purred every step of the way.

This car has never been in such good shape, all of the parts I have recieved from you and the team there have been top quality and I would have no problems suggesting others use you or coming back to you again.

Once again me and my V8 are very greatfull Regards

Ken Hall

Graham Sykes - 21st May 2012 21 May 2012
Details
   

Ductile iron flanged linered block casting

Good Morning Richard and Frieda,

Just a short note to let you know that we were successful in achieving our goal in breaking the British lands speed record for a 3 wheeled vehicle on Monday the 14th of May.

As you know you re-lined our block and bored the liners and decked the block as per request.

The 3.963.5 CC normally aspirated engine was tested on the dyno and produced 412bhp@7000rpm on Avgas/ 4 Star/ Toluene mix and makes 500LbFt @4400rpm we revved it to 8000 rpm and the engine performed fantastically.

We ran 180.38mph 1 way and 157.8mph into the wind in the opposite direction and broke the existing record that had stood for 12 years by 5.4mph making the 2 way average speed of 168.9mph.

We put your stickers on the bike to give you a little advertising for the company and I thought you may like to use these photos to promote the company.

Once again many thanks for doing such a fine job on the engine block and I am certain to be in need of your services again.

Yours in sport.
Graham Sykes



Marc Eppler, Germany - 10th May 2012 10 May 2012
Details
   

lead free gasflowed performance 2.25 petrol head

Dear Frida,

Thanks for the information.

My old Landrover runs now as good as never before. I’m very satisfied with the new cylinder head and also with your quick response in any case.

Best regards and good dealings
Ed vam Weeren, Rouy, France - 12th March 2012 12 Mar 2012
Details
   

TD5 Diesel stripped engine

Good morning Frida,

I would like to add that my car is running fine again with the engine you supplied and I thank you for that. The service you rendered is of top level and I will not doubt to recommend your esteemed company whenever I get the occassion.

Thanks and regards
Ed van Weeren

Javier Portillo, Madrid, Spain - 9th February 2012 9 Feb 2012
Details
   

2.5 Diesel stripped engine

Dear Richard,
Thank you very much indeed for such a thorough, professional and highly educated diagnosis. It is of great relief for me because it does not suggest that I mistreated the engine, does it?

I have always been very, very careful with services (every 1,500 miles) and revs (never driven at more than 45 mph), so I look forward to even my grand children driving the car.

Please quote me as a truly satisfied and delighted client of your unsurpassable quality and service standards.
Best wishes
Javier

Nigel Baguley, Dublin - 6th January 2012 6 Jan 2012
Details
   

200TDI Performance cylinder head (cou)

Good afternoon Frida,

Just a quick note, to let you know that we received our cylinder in perfect condition yesterday, as promised. I want to thank you for looking after us so well, the guys can’t wait to fit it!

Kind regards
Jonathan Staite, Surrey - 22nd June 2011 22 Jun 2011
Details
   

Ductile iron flanged linered block casting

Frida and Richard, good afternoon

I thought you might appreciate a brief update.....

Following your work on my "block" it all seemed to go back together without any issues, David Batty certainly seemed happy with what I presented him with.

I have now done about 500 miles in the car, carefully running it in as instructed, and all is going well, this mileage amounts to pretty much my annual mileage in the last couple of years!

I am determined to use it more now it has a great "new" engine, we just need some more good weather!

Many thanks for all of your help and good workwith this "project", I am forwarding you some pictures in case they are of interest/use to you, these are of the bare block, you have seen hundreds of these of course!, the rebuilt engine back in the car and a shot from "Goodwood" a couple of weeks ago.

These are on two e-mails due to file size, apparently.

Many thanks and best regards.

Jonathan Staite



Robert Stevens - Australia - 21st June 2011 21 Jun 2011
Details
   


300TDI Performance head

On a feedback note - this head would have to be one of the best additions to my 130. The additional power and performance was instantly noticeable whilst fuel economy appears to be unchanged. I'm very impressed.

Regards
Robert Stevens

Bill Blazeby, Kent - 20th May 2011 20 May 2011
Details
   

lead free 2.25 petrol head

I fitted a remanufactured head to my 2.25 petrol 5 bearing engine.

Thanks for the great service and the new head fitted fine and has made a big difference in running better

Bill Blazeby

Roberto Mata, Madeira, Portugal - 11th February 2011 11 Feb 2011
Details
   

RTC 6795N 2.5 Turbo Diesel short engine

Dear Mrs Frida
I received my 2.5 TD Short engine and it looks awsum!! Thank you for bringing light for my Land Rover.

I also would like to send a big Thank You for all the Turner Engineering Team that made this possible. I would and will always recommend your services. Turner Engineering exceeded my expectations on professional and efficiency relation with customers.
Once again,
Thank you Turner Engineering Team
Thank You Mrs Frida

Best regards
Roberto Mata

Petros Balomenos, Land Rover's Rebuild - repairs Athens, Greece - 8th January 2011 8 Jan 2011
Details
   

4.0 V8 Stripped Engine - ductile iron flanged liners

Dear Miss Frida

The following photograph is a 4.0L Petrol engine we buy from yours.

We put this engine to a Defender 110' years 1989 who was a 3.5L Petrol twin carb. The cliend is to hapy with the performance off his car and he wands to thank you for the good job you made for his engine.

Also our shop and the tecnicians would like to thank you for the very good job you made to all the engine that we buy from yours.

Best regards
The Internet Advisor and the Chief Manager
Velissarios Balomenos and Peter Balomenos

Philip Gilliver, UK - 17th December 2010 17 Dec 2010
Details
   

300TDI stripped engine gasflowed performance head

Hello,

The exchange 300tdi engine with gasflowed cylinder head has been very carefully run in and has now done 1200 miles with a change of oil and filter at approx 500 miles. I cannot put into words how pleased I am with it. There is so much smooth torque and power .The acceleration in traffic is effortless, and there is no need to rev it, just keep changing up a gear and the grunt brings a smile to my face. It is quiet , and silky in the power delivery, and simply purrs along at cruising speeds You can almost hear it laughing at hills. I wonder what there is to come when or if I ever need to rev it above 2700rpm, which it hasn't seen yet. I strongly advise anyone needing a new 300tdi engine, to buy a Turner with the gasflowed head. It is a complete waste of money to fit anything else.

My Sincere Thanks
Philip Gilliver

Peter Walker, Australia - 8th December 2010 8 Dec 2010
Details
   

300TDI parts

Hello from Melbourne. Just a belated thank you for the prompt and professional service you have provided on a couple of occasions now. I continue to recommend!

Pete Walker

Andrew Jamieson, UK - 5th December 2010 5 Dec 2010
Details
    TD5 head & fitting kit

Just a short note, I felt I had to write a few words of thanks for the service, very friendly and super efficient. Less than 24hrs from order to delivery despite the snow. If only more compnaies provided this level of service!!

Many thanks Andrew Jamieson
P Gilliver, Staffs - 5th November 2010 5 Nov 2010
Details
   

300TDI stripped engine performance

Just a grateful thankyou for the prompt delivery of my new engine. It looks too good to put in a rather dirty Land Rover and would look nice in the lounge ! I can't wait to get it fitted and if it runs as well as it looks , I will be highly delighted. Once again my sincere thanks for your superb service.

Kind Regards
Philip Gilliver

JF Gordon, Kent - 26th October 2010 26 Oct 2010
Details
   

300TDIstripped engine performance

I refer to my letter to you of 16th November 2009, and want to let you know that the above engine, fitted to my Discovery some 13 months and 18.000km ago, continues to run very smoothly. There have been no reliability issues and the only adjustment required was to the tappets once they had bedded down. The extra flexibility provided by the gaslfowed head makes the car more relaxing to drive, and also improves fuel consumption especially on long runs.

In the nature of things I don't see myself buying another re manufactured engine in the foreseeable future but I should not hesitate to recommend your firm to anyone who needed one. Many thanks for a first class product and a servie to match.

Your sincerely
JF Gordon

Brian, Co Armagh, Northern Ireland. 22nd September 2010 22 Sep 2010
Details
   

4.6V8 stripped engine Ductile iron flanged liners

This is just a short message to thank you for the brilliant service I received when I purchased the above reconditioned engine. It arrived when I was told to my installer, with all the gaskets, oil and extras I ordered. Once installed it runs quiet, the car drives like new and the economy has improved from 12mpg to 20mpg, which as an average mpg with a car that runs on LPG makes it a very cheap Range Rover to run. The power is really good, much better than the original engine and its smooth and effortless.

I would recommend a turner engine to any serious Landrover owner. My car is refurbished and with the engine now installed it is back to factory condition both mechanically and cosmetically, in fact now its better than new mechanical condition.

I will gladly speak to any prospective purchasers to endorse your engines in Northern Ireland, just contact me by email so I can agree to my details being passed on

Best Regards
Brian
Co Armagh, Northern Ireland

AG Land Rover Unlimited - Holland - 9th July 2010 9 Jul 2010
Details
   


2.25 5MB Petrol Performance engine

I received the engine yesterday in good order and would like to compliment you on how good looks! It is the first time in nearly 30 years of being a mechanic that I see an engine delivered which looks so neat and complete, wonderful!

This is a wonderful piece of advertising for you, it gives trust in how you deal with things.

Please pass on my compliments to all the staff at Turner Engineering.

Ad

John Dougherty - Western Australia - 18th June 2010 18 Jun 2010
Details
   
LDF109390L Freelander 1.8 Petrol head


Hi all at Turner Engineering

The Head arrived a few minutes ago, we are impressed with your efficient service I haven't opened the box yet as hubby is off work sick... I am sure he will be equally as impressed... we are not used to such efficient service these days... living in WA (wait a while) we can be waiting for two days or more for parts from Perth which is only 75km away!

As the aussies would say ... "good on ya mate"
Erik Haugen - Norway - 15th June 2010 15 Jun 2010
Details
   


TD5 cylinder head & fitting kit


Good afternoon,

Must say I'm really impressed with the service you offer your customers, I allready received my package from the UK, meaning time from order completed to delivery less than 24 hrs!

Thanks again!
Kind regards
Eirik Haugen

Andy Dawe - 8th March 2010 8 Mar 2010
Details
   

0TDI gasflowed performance cylinder head

Just a short note to say thank you for the supply of one of your Gas flowed 200tdi cylinder heads. Special thanks to Freda for making sure all the parts I needed were included in the order and Richard for the tour of the workshop and engine advice.

My observations of the tuned head are money well spent. With the tuned head it fools you into thinking the engine is a bit bigger. What is actually happening is the engine is more efficient when the turbo is not on boost. The engine now pulls from very low revs. At the end of my road is a junction on a hill. I used to pull out in first and rev it hard in first keeping momentum for change into second. If I short shifted into second gear with not enough revs the Disco would struggle to get its momentum. With the tuned head it just pulls gone is the step in power delivery with the turbo acting like an on/off switch the power is delivered in a seamless strong manner. Better for towing and economy has improved.

Again many thanks.
Andy Dawe

Chris Hardie - Perth, Australia - 11th January 2010 11 Jan 2010
Details
   


TD5 engine parts package

Hi Richard.

I just received the pistons etc that I ordered. Thank you very much. I am truly amazed at the speed or which they arrived. Wonderful. Thanks very much.

Well done
Chris Hardie

Tommy Kechvar, Austria - 30th November 2009 30 Nov 2009
Details
   

TD5 Cylinder Head, fitting kit & parts

Dear Frida

I just want to give you a feedback..

The defender runs great with your cyl.head and the other parts, now we have 1000km…and the first service.

Thanks you very much for your efforts.

Best regards from nearby vienna/austria
Duncan Wright - 24th August 2009 24 Aug 2009
Details
   

2.25 petrol 3MB Stage 1 Cylinder Head

Dear All at Turner Engineering,

Just a quick note to say thanks for a fantastic product! A local garage – Maghull Four Wheel Drive – recently fitted a stage 1 head to my ex-military series 3 Marshall-bodied ambulance and what a difference! Although it will never be a ball of fire on the road, combined with electronic points, the difference is enormous – no more pedal to the floor to keep it at 50, no more shifting down to third or second on hills, no more queues of traffic building up behind - it easily keeps up with traffic. Considering that it’s over 30 years old, it feels as though it has a spring in its step once again. Brill!

Thanks, Duncan Wright

Steve Gross, Scottsdale, AZ , USA - 21st August 2009 21 Aug 2009
Details
   

300TDI engine parts

Frida & Richard-

I would like to thank you for your prompt and professional response to the parts I required to rebuild my 300Tdi. Also, I appreciate your help answering the technical questions regarding the overhaul.

Your knowledge regarding shipping was also excellent.

The engine rebuild is complete and the engine runs better than it did when new. I recommend your company to others here in the Landrover community.

Thanks very much for everything.

Steve Gross
Scottsdale, AZ
Ana Botelho - Azores - 29th July 2009 29 Jul 2009
Details
   


2.25 5MB Diesel stripped engine.

Hello,

Justto letyou know that the enginehas arrived to azores. Everything get's here in perfect conditions, thank you so much.

Best regards
Ana Botelho

Stavros Christodoulou - Cyprus - 22nd July 2009 22 Jul 2009
Details
   


300TDI engine parts package

Just to say that I received my order today, everything is in perfect condition, thanks for the great service, and also fast one. Keep on the good job there.

Best regards
Peter Oldale , France - 17th June 2009 17 Jun 2009
Details
   


2.25 3MB Diesel stripped engine

Excellent product, excellent service and a very happy man and his new lightweight! Not a leak anywhere and runs like new!

Thanks to all the team.

Best Regards
Peter Oldale

Julian Simpson, Denmark - 10th June 2009 10 Jun 2009
Details
   


Stage 1 lead free performance 2.25 head

The head change itself took about 5 hours in total and the engine started first time and with no cloud of blue smoke – this has never happened to me in the 5 years I've had her. After running in etc. I was easily able to pull up a local hill in 4 th that previously needed 3 rd . Also, I was able to get 126 km/h out of her on the motorway (130 limit in Denmark). 126 km/h is 78 mph in old money and 6mph faster than the original spec for a 1973 SWB. As well as being quieter inside, I certainly notice a significant improvement in drivability around town (much fewer gear changes), and the fuel consumption is considerably better; I thought at first the needle was stuck as it didn't seem to move down. We can't wait to see how it performs this summer with the caravan behind. Thank you.

Kind regards,
Julian Simpson

David Davenport, Somerset -2nd June 2009 2 Jun 2009
Details
   

TD5 cylinder head with fitting kit

Hello Frida,

Thanks very much for sorting this out.This was the week before half term and there was a whole holiday come birthday party hanging on the availability of the LandRover. Coupled withyour efficient serviceand Taunton LandRover you both did a splendid job of honouring your commitments.Very much appreciated.Taunton LandRover had not heard of you before, but without any prompting from me they commented on the quaility of the cylinder head and kit yousupplied.

The engine now feels a lot better and towed a 20ft twin axle van up the M6 complete with wife and 4 kids - with no effort at all -even though there is 100,000 on the clock. So once again thanks very much for your efforts and even though I spent a lot more on the repair than I ever thought -I do feel re-assured that I got value for money.

Thanks
David Davenport

Steve Wells, Herts -28th May 2009 28 May 2009
Details
   

4.6V8 ductile iron flanged linered block casting

Hi, just to let you know we have achieved our aim of running an 8 second pass using a Rover V8 engine. Your cylinder block with Ductile iron liners has held up to the extreme pressures of a supercharger and methanol fuel and we are very pleased with it. We ran a best of 8.93 @ 146 mph in the 1/4 mile and reached 119.87mph in 5.59 seconds to the 1/8 mile, with more to come. We think this is the first '8' from a rover without nitrous injection. More details can be found on our web sitewww.teamorange.org.uk

Steve Wells

Matt Abraham - 13th March 2009 13 Mar 2009
Details
   

 


2.5 Diesel new cylinder head

TE,

I just received my 2.5D cylinder head. I cannot thank you enough and am absolutely blown away by the service I received from you. You responded to all of my emails within MINUTES, the price of the head was very very fair, and shipping overseas was unbelievably fast.

I haven't put it in the Rover yet, but I'm sure I'll be just as blown away by its quality and performance. I was very upset when I found the cracks in my old head and thought I would be in for an expensive ordeal trying to find a head for this engine in the US. But you guys actually made this an enjoyable experience.

I have recommended you to my mechanic and he was also very impressed with your site. I cannot thank you enough! If only you could solve all my Rover problems....

Matt

Bill de Vries, ACT, Australia - 3rd March 2009 3 Mar 2009
Details
   


New TD5 cylinder head & fitting kit

Hello Frida

Thank you for the last message in Dutch.

Anyway, the Defender is now running better than it ever has (a new loom to the injectors helped). No longer the flat spots when accelerating. My mechanic was impressed with the quality and greater strength of the head. Once again thanks for your prompt attention and help. I would still be waiting for a replacement head here but for your help. Koekke Bakkers!

All the very best.
Bill de Vries

Nicholas Guy Kendal Webb-27 January 2009 27 Jan 2009
Details
   

 4.0 V8 stripped engine - gasflowed heads

Hi I dont know if you remember me but I bought a 4 litre V8 from you way back in July 2005 for my 1995 discovery.

It has now done 121,000 miles since it was fitted and it's still running as sweetly as ever! It has spent its entire life pulling a heavy trailer and when it is fully laden the gross weight is often near the maximum of 3.5 tons (plus of course the car at 2100kg and my fat labrador!) There are no significant oil leaks and obviously as you've never heard from me since I bought it I havent had any problems whatso-ever! 

So I just wanted to say "Thanks for a great engine and all the happy miles behind us so far!" :-)

Nicholas Guy Kendal Webb

Howard Griffiths - Cheshire 18th December 2007 18 Dec 2008
Details
   

300TDI stripped engine, performance head

Dear all,

Just a quick note to let you know how thrilled I am with the replacement engine and head. The new head has transformed the performance. Special thanks to the lady who I spoke to when first enquiring (sorry the name escapes me) Her advice was absolutley spot on. I wont hesitate to recommend your company to anyone.

Happy Christmas to you all
kind Regards
Howard Griffiths


 

Turner Engineering is a division of Agency & General Investment Co Ltd.

Registered in England No1115015. Registered Office: BR1 3RA

 

VAT No GB 210 9301 15