Shopping Satisfaction
ORDER BY PHONE: +44 (0) 1342 834713   Account  
CART:  0
  Back to Signatures
Graham Sykes - 21st May 2012 21 May 2012

Ductile iron flanged linered block casting

Good Morning Richard and Frieda,

Just a short note to let you know that we were successful in achieving our goal in breaking the British lands speed record for a 3 wheeled vehicle on Monday the 14th of May.

As you know you re-lined our block and bored the liners and decked the block as per request. The 3.9 63.5 CC normally aspirated engine was tested on the dyno and produced 412bhp @ 7000rpm on Av gas/ 4 Star/ Toluene mix and makes 500LbFt @ 4400rpm we revved it to 8000 rpm and the engine performed fantastically.

We ran 180.38mph 1 way and 157.8mph into the wind in the opposite direction and broke the existing record that had stood for 12 years by 5.4mph making the 2 way average speed of 168.9mph.

We put your stickers on the bike to give you a little advertising for the company and I thought you may like to use these photos to promote the company.

Once again many thanks for doing such a fine job on the engine block and I am certain to be in need of your services again.

Yours in sport.
Graham Sykes



Visa, Paypal, Mastercard


Uk mainland overnight delivery.
WORLDWIDE delivery


+44 (0) 1342 834713

Agency & General Investment Co Ltd - T/A Turner Engineering

Churchill House, West Park Road, Newchapel, Surrey, RH7 6HT, UK

Registered in England 1115015 - VAT No. GB. 210 9301 15 - EORI No GB 210930115000