Good quality part supplied by Turner Engineering and quick delivery.
Martin S. 1/16/2024 at 20h01
Good quality Elring original equipment gasket.
H W. 1/7/2024 at 13h42
Way better than another well know supplier.
Vic G. 11/23/2023 at 07h59
Arived with the top section "curved" due to packaging size limitations, but left flat in the bag for a day with the box on top, and all good. Fitted perfectly.
Dave B. 6/18/2023 at 18h48
This is a gasket made by Elring, a seal specialist. The gasket is good. For certainty, I honed the joint between the crankcase and the ladder because there was a slight lip there, and because of this used a small amount of Dirko silicon sealant (Turner's) around the edge of the castings and along the mainbearing cap joint/ T seal ends and along the joint between the crankcase and the ladder before putting the gasket in place and then fitted the crankshaft seal.
Stephen Smith. 4/27/2023 at 22h05
All good.
Steve B. 1/27/2023 at 06h17
Good quality product
No problems at all
Would definitely use again.
Keith Adrian L. 7/3/2022 at 11h22
High Quality.
Sam S. 7/31/2021 at 11h58
Excellent quality and service.
Terry C. 6/6/2021 at 01h09
Excellent.
Eifion J. 2/1/2021 at 09h04