Still awaiting fitment.
Joseph S. 9/14/2023 at 17h02
New.
Chris G. 6/17/2023 at 03h36
Excellent Quality.
Shane B. 3/22/2023 at 12h03
I will make it run.
Michael P. 9/9/2021 at 16h15
100%.
Jim L. 5/21/2021 at 18h03
Excellent quality parts.
PJ M. 10/4/2020 at 15h57
Very good.
Cyrille B. 11/20/2019 at 07h49
Very pleased with the quality and engineering of this cam shaft. can't wait to fit it to my rebuilt motor.
David b. 9/30/2019 at 23h44
Looks to be very good.
Andrew W. 8/6/2019 at 12h33
Some assembly guidance ould be useful since this is a non-standard part, i.e. where does the spacer go?
Ray L. 12/27/2018 at 07h58
As ordered.
David M. 11/9/2018 at 07h02
Superb service. Very knowledgeable and professional.
Rob W. 11/3/2018 at 17h40
This is a 2.5 Cam I am installing in a 2.25 88" . This Turner Cam is made correctly, and fit perfectly. I had tried three Cams from another supplier, Bearmac*, and the front Thrust spacer machined into the front of the Cam was made wrong. The Bear* Cams were 0.010" to long at the machined in spacer, I was afraid to grind them to the correct dimension as it may have gotten into soft metal. I made them aware of the problem and they did not seem to care.
SteveKY. 2/18/2017 at 06h20
AAA.
Justus Hartnack. 3/26/2016 at 00h00 Review collected by Feefo
Dean Gullery. 2/15/2016 at 00h00 Review collected by Feefo
Chris Hinksman. 7/23/2015 at 00h00 Review collected by Feefo
Antony Crouch. 5/8/2015 at 00h00 Review collected by Feefo
Maurice Pim. 5/6/2013 at 00h00 Review collected by Feefo
