TURNER ENGINEERING +44 (0)1342 834713

Main Pages

Best Selling Products

LDF500170 TD5 Cylinder Head

LDF500170 TD5 Cylinder Head


Price: £1,095.00 (Excluding VAT at 17.5%)

New TD5 cylinder head - late type (1 internal, 1 external fuel gallery). Complete with valves & springs assembled Spanish replacement manufacture of superior quality to original equipment. Buy together with the fitting kit. .
find out more

 

TD5 Cylinder head fitting Kit

TD5 Cylinder head fitting Kit


Price: £150.00 (Excluding VAT at 17.5%)

Fitting kit for LDF500160 & LDF500170. Includes: head bolts (AMC), head gasket, inlet manifold gasket, exhaust manifold gasket, fuel regulator gasket, rocker cover gasket, injector O rings, 2 steel head locating dowels. injector washers.


find out more

 

LDF500180 300TDI Cylinder Head Complete

LDF500180 300TDI Cylinder Head Complete


Price: £410.00 (Excluding VAT at 17.5%)

300TDI Original equipment. Complete with new valves & springs assembled. Buy together with head fitting kit & head bolt set.
find out more

 

300TDI head fitting kit

300TDI head fitting kit


Price: £27.50 (Excluding VAT at 17.5%)

Fitting kit suitable when buying together with a new cylinder head with valves & springs assemled. Includes head gasket, manifold gasket, rocker cover gasket, thermostat housing gasket & injector washers. (no stem seals included)
find out more

 

Block Casting Remanufactured

Block Casting Remanufactured


Price: £1,250.00 (Excluding VAT at 17.5%)

Remanufactured cylinder block casting fitted with Ductile iron flanged liner * upgrade. Honed to standard size, new core plugs fitted - pressure tested, skimmed decks of block; line honed main bearing housings; new camshaft bearings fitted . *Heavy duty Ductile iron flanged linered blocks (top hat flanged liners) - Ductile iron is an extremely heavy duty material which is used in high performance race engines including top fuel dragsters. This extremely robust material offers significantly higher strength in the critical flange area of the liner. Our design is unique in that it also incorporates a seal at the bottom of the liner. This type of liner is unique to Turner Engineering and not available elsewhere. Our confidence is such in this product line that we offer a three year warranty.. . Other minimum parts required to build up your engine: big end bolt set (ERR 1772); head bolt set; gasket/seal kit top & bottom; piston ring set (STC 1427) plus other optional parts such as hydraulic lifters (ERC 4949); bearing sets (STC 1426; STC 4299) etc.

NOTE: UK - service exchange - old unit collected later date
find out more

 

300TDI Head Bolt set

300TDI Head Bolt set


Price: £25.00 (Excluding VAT at 17.5%)

Full set of head bolts to fit 300TDI cylinder head including grease.
find out more

 

TURNER ENGINEERING +44 (0)1342 834713

Testimonials from some of our customers

Ingo Bartsch, Costa Rica - 3rd September 2010
Lead Free Performance cylinder head


Dear Frida,

You are the best, without any doubt.

Thank you very much. Parcel was delivered half hour ago. So quick, without stress because of your help. Perfect service, I'm very happy.

Best regards & a nice weekend,
Ingo


Marcos Machuca, USA - 29th July 2010
V8 parts


I just received the part today, im very thankful for your help , it was really good doing business with you and the shipping was very fast and on time, thank you.


John Dougherty - Western Australia - 18th June 2010
LDF109390L Freelander 1.8 Petrol head


Hi all at Turner Engineering

The Head arrived a few minutes ago, we are impressed with your efficient service I haven't opened the box yet as hubby is off work sick... I am sure he will be equally as impressed... we are not used to such efficient service these days... living in WA (wait a while) we can be waiting for two days or more for parts from Perth which is only 75km away!

As the aussies would say ... "good on ya mate"
Eve


Erik Haugen - Norway - 15th June 2010
TD5 cylinder head & fitting kit

Good afternoon,

Must say I'm really impressed with the service you offer your customers, I allready received my package from the UK, meaning time from order completed to delivery less than 24 hrs!

Thanks again!
Kind regards
Eirik Haugen


Chris Hardie - Perth, Australia - 11th January 2010
TD5 engine parts package

Hi Richard.

I just received the pistons etc that I ordered. Thank you very much. I am truly amazed at the speed or which they arrived. Wonderful. Thanks very much.

Well done
Chris Hardie



Tommy Kechvar, Austria - 30th November 2009
TD5 Cylinder Head, fitting kit & parts

Dear Frida

I just want to give you a feedback..

The defender runs great with your cyl.head and the other parts, now we have 1000km and the first service.

Thanks you very much for your efforts.

Best regards from nearby vienna/austria
Tommy


Steve Gross, Scottsdale, AZ , USA - 21st August 2009
300TDI engine parts

Frida & Richard-

I would like to thank you for your prompt and professional response to the parts I required to rebuild my 300Tdi. Also, I appreciate your help answering the technical questions regarding the overhaul.

Your knowledge regarding shipping was also excellent.

The engine rebuild is complete and the engine runs better than it did when new. I recommend your company to others here in the Landrover community.

Thanks very much for everything.

Steve Gross
Scottsdale, AZ
USA


Stavros Christodoulou - Cyprus - 22nd July 2009
300TDI engine parts package


Just to say that I received my order today, everything is in perfect condition, thanks for the great service, and also fast one. Keep on the good job there.

Best regards
Stavros


David Davenport, Somerset -2nd June 2009
TD5 cylinder head with fitting kit


Hello Frida,

Thanks very much for sorting this out. This was the week before half term and there was a whole holiday come birthday party hanging on the availability of the LandRover. Coupled with your efficient service and Taunton LandRover you both did a splendid job of honouring your commitments. Very much appreciated. Taunton LandRover had not heard of you before, but without any prompting from me they commented on the quaility of the cylinder head and kit you supplied.

The engine now feels a lot better and towed a 20ft twin axle van up the M6 complete with wife and 4 kids - with no effort at all - even though there is 100,000 on the clock. So once again thanks very much for your efforts and even though I spent a lot more on the repair than I ever thought - I do feel re-assured that I got value for money.

Thanks
David Davenport


Matt Abraham - 13th March 2009
2.5 Diesel new cylinder head


TE,

I just received my 2.5D cylinder head. I cannot thank you enough and am absolutely blown away by the service I received from you. You responded to all of my emails within MINUTES, the price of the head was very very fair, and shipping overseas was unbelievably fast.

I haven't put it in the Rover yet, but I'm sure I'll be just as blown away by its quality and performance. I was very upset when I found the cracks in my old head and thought I would be in for an expensive ordeal trying to find a head for this engine in the US. But you guys actually made this an enjoyable experience.

I have recommended you to my mechanic and he was also very impressed with your site. I cannot thank you enough! If only you could solve all my Rover problems....

Matt


Bill de Vries, ACT, Australia - 3rd March 2009
New TD5 cylinder head & fitting kit


Hello Frida

Thank you for the last message in Dutch.

Anyway, the Defender is now running better than it ever has (a new loom to the injectors helped). No longer the flat spots when accelerating. My mechanic was impressed with the quality and greater strength of the head. Once again thanks for your prompt attention and help. I would still be waiting for a replacement head here but for your help. Koekke Bakkers!

All the very best.
Bill de Vries


G Beacham - 17th November 2008
Engine parts

Hello Frida,

I'd just like to say a big thank you for the service provided by you to me just the other day and also for the rather rapid delivery of the engine parts I ordered from you ( big end and main bearings and core plugs ).

As ever Turner Engineering is top of my list whether its buying an engine, a head or a few parts - my experiences so far !

Good luck with the continued success of your business from a very satisfied customer over many miles and years.

Yours appreciatively,
Geoffrey Beacham.


Martyn Williams - Byford, Western Australia 30th June 2008
300TDI engine rebuild parts package


Hi Frida

Just to let you know the parts arrived today, what a surprise. Can't thank you enough for the quality of the service. Such an easy transaction and everything appears to be right. Onward to the rebore now, the amazing thing is I ordered some parts from Adelaide the day before I ordered the parts from you and they still haven't arrived, how's that? I'll be in touch for the same order again as soon as I've finished this rebuild. Might be as early as late July, I'll be in touch. Fantastic service and so easy to deal with. Thank you.

All the very best
Martyn Williams


Len Cater, Canada - 9th June 2008
2.25 diesel cylinder head


Everything has arrived and we should be firing up the beast tomorrow.

Thanks again for the great turn around on my order and getting it here quickly!

We have a club event (Ottawa Valley Land Rover - the oldest landy club in North America) and I will be sure to boast about your service. We get about 40 trucks out for our summer soltice event with the majority of them being Series.

Thank you
Len Cater


Pete Jarvis -3rd June 2008
2.25 lead free petrol cylinder head


To all at Turner Engineering,

I would lilke to thank you all for the help and the great service I received from you all regarding the replacement cylinder head I ordered. I don't think I could have got better service anywhere else, especially at the speed next day delivery! Couldn't be better.

Thanks again
Pete Jarvis


Darren Angel - 25th March 2008
Spin on oil filter adapter assembly


Hello Frida
I've just received my oil filter adapter. May I say a very big thank you, it's superb. Also thank you for such prompt and fast service. It comes as no surprise that Turner Engineering has such a good name.

Kindest Regards to all at Turner Engineering Darren Angel



Anna, Peru - 4th September 2007
2.5 Turbo Diesel cylinder head


Dear Frida,
Just a quick email to say thank you very much for arranging the new cylinder head to be shipped to Peru. We collected our Landy a few weeks ago from the mechanic and the engine is purring like a kitten! It starts on the first turn better than it ever did before. Thought you may like to see a picture of him in action in the desert in Peru last week.

2.5 Turbo Diesel head Installed

Kind Regards
Anna


Charlie Haigh, USA - 11th August 2005 - 300TDI parts

Frida
I received my parts today and the car is fixed. Thanks so much for the prompt service.

Charlie Haigh


Alistair Anton, Malawi - 7th June 2005
300TDI cylinder head

Frida
Hi, thanks for the prompt service, hopefully customs in Malawi will be just as efficient!

Best regards
Alistair


John Bennett - 1st December 2004
300TDI new cylinder head


hi all my name is john bennett i have just purchased a cylinder head for my disco 300 tdi i would like to say thanks for the great service and advice fast delivery excellent stuff i will recommend you in future thanks once again

Regards
john bennett


Trevor Rhodes- 9th October 2004
New TD5 cylinder head

Hi
Just a quick e-mail to thank you for the fast & efficient service you gave re the supply of a new cylinder head for my Discovery td5, Arrived next day approximately 24hrs from phone call to order. Wish all companies where as good as yours!


Many thanks
Trevor Rhodes
Wakefield, West Yorkshire.


Al Soares, Portugal - 10th September 2003
300TDI new head & parts

Dear Frida,

Just wanted to thank you for the prompt processing and shipping of my order. I received it yesterday at 11:30 A.M. Which is about 24 hours after I ordered it! Here in Portugal nothing works this efficiently.

Thanks again,
Al Soares


Juan Reyes Martines Rafecas, Portugal - 30th April 2003
300TDI complete new cylinder head


Dear Frieda,
Just to let you know that I received the cylinder head for my Defender 300 TDI from you yesterday afternoon and felt that I should convey to you my great appreciation for your extremely fast and efficient service!
Many thanks and best regards,

Juan Reyes Martinez Rafecas
Portugal


For further testimonials including for our engines supplied click HERE for more.

Top of page