TURNER ENGINEERING +44 (0)1342 834713

Main Pages

Best Selling Products

LDF500170 TD5 Cylinder Head

LDF500170 TD5 Cylinder Head


Price: £1,095.00 (Excluding VAT at 17.5%)

New TD5 cylinder head - late type (1 internal, 1 external fuel gallery). Complete with valves & springs assembled Spanish replacement manufacture of superior quality to original equipment. Buy together with the fitting kit. .
find out more

 

TD5 Cylinder head fitting Kit

TD5 Cylinder head fitting Kit


Price: £150.00 (Excluding VAT at 17.5%)

Fitting kit for LDF500160 & LDF500170. Includes: head bolts (AMC), head gasket, inlet manifold gasket, exhaust manifold gasket, fuel regulator gasket, rocker cover gasket, injector O rings, 2 steel head locating dowels. injector washers.


find out more

 

LDF500180 300TDI Cylinder Head Complete

LDF500180 300TDI Cylinder Head Complete


Price: £410.00 (Excluding VAT at 17.5%)

300TDI Original equipment. Complete with new valves & springs assembled. Buy together with head fitting kit & head bolt set.
find out more

 

300TDI head fitting kit

300TDI head fitting kit


Price: £27.50 (Excluding VAT at 17.5%)

Fitting kit suitable when buying together with a new cylinder head with valves & springs assemled. Includes head gasket, manifold gasket, rocker cover gasket, thermostat housing gasket & injector washers. (no stem seals included)
find out more

 

Block Casting Remanufactured

Block Casting Remanufactured


Price: £1,250.00 (Excluding VAT at 17.5%)

Remanufactured cylinder block casting fitted with Ductile iron flanged liner * upgrade. Honed to standard size, new core plugs fitted - pressure tested, skimmed decks of block; line honed main bearing housings; new camshaft bearings fitted . *Heavy duty Ductile iron flanged linered blocks (top hat flanged liners) - Ductile iron is an extremely heavy duty material which is used in high performance race engines including top fuel dragsters. This extremely robust material offers significantly higher strength in the critical flange area of the liner. Our design is unique in that it also incorporates a seal at the bottom of the liner. This type of liner is unique to Turner Engineering and not available elsewhere. Our confidence is such in this product line that we offer a three year warranty.. . Other minimum parts required to build up your engine: big end bolt set (ERR 1772); head bolt set; gasket/seal kit top & bottom; piston ring set (STC 1427) plus other optional parts such as hydraulic lifters (ERC 4949); bearing sets (STC 1426; STC 4299) etc.

NOTE: UK - service exchange - old unit collected later date
find out more

 

300TDI Head Bolt set

300TDI Head Bolt set


Price: £25.00 (Excluding VAT at 17.5%)

Full set of head bolts to fit 300TDI cylinder head including grease.
find out more

 

Online Catalogue |  3.5V8

TURNER ENGINEERING +44 (0)1342 834713

3.5V8

Online Catalogue |  3.5V8

RTC 2295 Piston Assembly

RTC 2295 Piston Assembly


Price: £35.00 (Excluding VAT at 17.5%)

Quantity:

Choose Size

Piston assembly including rings, gudgeon pin, circlips. 3.5V8. Original equipment

RTC 2408 20 Piston Ring set

RTC 2408 20 Piston Ring set


Price: £60.00 (Excluding VAT at 17.5%)

Quantity:

3.5V8 piston ring set for 8 pistons, 020 oversize. Original equipment.

RTC 2117 Bearing Set Conrods

RTC 2117 Bearing Set Conrods


Price: £25.00 (Excluding VAT at 17.5%)

Quantity:

Choose Size

Conrod bearing set. Original equipment

RTC 1718 Bearing Set Mains

RTC 1718 Bearing Set Mains


Price: £29.50 (Excluding VAT at 17.5%)

Quantity:

Choose Size

Main bearing set. Original equipment

ERC 4949 Hydraulic Lifter

ERC 4949 Hydraulic Lifter


Price: £5.25 (Excluding VAT at 17.5%)

Quantity:

Hydraulic lifter. Land Rover

603378 Pushrod

603378 Pushrod


Price: £2.25 (Excluding VAT at 17.5%)

Quantity:

Pushrod. original equipment

Shim Kit

Shim Kit


Price: £20.00 (Excluding VAT at 17.5%)

Quantity:

Shim kit to set the lifter preload. Lifter preload is the distance between the pushrod seat in the lifter and the circlip when the lifter is on the heel of the cam and the valve is closed. Not setting the lifter preload, could cause premature wear, or somthing to break. Also if preload is too high; your hydrocarbon reading will be too high to pass the MOT. Shim kit comes with full instructions and contains three sets of shim thicknesses; thin; medium and thick.

ETC 6849 Camshaft

ETC 6849 Camshaft


Price: £59.00 (Excluding VAT at 17.5%)

Quantity:

Camshaft 9.35:1 CR.

Competition Cams Cam Shaft Lube

Competition Cams Cam Shaft Lube


Price: £2.74 (Excluding VAT at 17.5%)

Quantity:

Pro cam & lifter lubricant. 5/8 fl oz - 18.75cc

Apply a liberal lubricating coating to the foot of each lifter, camshaft lobe and gear.
Adheres to camshaft and lifters during storage and break-in
Increases load capacity of engine to prevent scuffing and galling.

RTC 5918 Camshaft Bearing Set

RTC 5918 Camshaft Bearing Set


Price: £19.50 (Excluding VAT at 17.5%)

Quantity:

Camshaft bearing set, pre finished. American manufacture

ERR 2958 Crank Chainwheel

ERR 2958 Crank Chainwheel


Price: £4.50 (Excluding VAT at 17.5%)

Quantity:

Crankshaft chain wheel.

ERC 7929 Timing Chain

ERC 7929 Timing Chain


Price: £8.20 (Excluding VAT at 17.5%)

Quantity:

Timing chain

610289 Camshaft Chainwheel

610289 Camshaft Chainwheel


Price: £9.84 (Excluding VAT at 17.5%)

Quantity:

Camshaft chainwheel

LGH000040 Valve Exhaust

LGH000040 Valve Exhaust


Price: £8.20 (Excluding VAT at 17.5%)

Quantity:

Valve exhaust

LGH000030 Valve Inlet

LGH000030 Valve Inlet


Price: £6.50 (Excluding VAT at 17.5%)

Quantity:

Valve inlet

ERR 4628 Valve Spring

ERR 4628 Valve Spring


Price: £2.88 (Excluding VAT at 17.5%)

Quantity:

Valve spring - British manufactured from Swedish wire

611659L Rockershaft

611659L Rockershaft


Price: £15.50 (Excluding VAT at 17.5%)

Quantity:

Rockershaft

602154 Rocker

602154 Rocker


Price: £6.50 (Excluding VAT at 17.5%)

Quantity:

Rocker. Steel replacement

602153 Rocker

602153 Rocker


Price: £6.50 (Excluding VAT at 17.5%)

Quantity:

Rocker. Steel replacement

ERC 1351 Oilpump Shaft

ERC 1351 Oilpump Shaft


Price: £14.50 (Excluding VAT at 17.5%)

Quantity:

Oilpump shaft

614037 Oilpump Gear

614037 Oilpump Gear


Price: £4.30 (Excluding VAT at 17.5%)

Quantity:

Oilpump gear

3.5V8 Gasket Set Top

3.5V8 Gasket Set Top


Price: £45.00 (Excluding VAT at 17.5%)

Quantity:

Gasket & seal kit - top including composite head gaskets

Running in oil

Running in oil


Price: £14.95 (Excluding VAT at 17.5%)

Quantity:

Millers running in oil 5 litre can. To be used if new pistons and/or piston rings are fitted for 500 miles to promote correct bedding in of piston rings and reduce the possibility of oil consumption as a result of cylinder bore glaze. Suitable for both petrol & diesel engines. Two cans required. . Note: this item can only be sent road freight and is not available outside Europe (air freight).

ERR 3340 Oil Filter

ERR 3340 Oil Filter


Price: £4.95 (Excluding VAT at 17.5%)

Quantity:

Oil Filter, spin on type. Land Rover

Heat tab

Heat tab


Price: £0.59 (Excluding VAT at 17.5%)

Quantity:

Fit to your cylinder head and/or cylinder block casting. The use of heat tabs which give some indication as to engine operating temperatures. Heat Tabs will not indicate individual cylinder conditions, only the coolant temperature in the engine.

Online Catalogue |  3.5V8

Top of page